DRONEiT-FC
Flight Controller (FC)
DRONEiT-FC is a high-performance FC to secure the stability of data processing and flight for mission.
Key Benefits
PRODUCT DESCRIPTIONS
Single-board Flight Controller
STM32H7 Series 32-bit Arm® Cortex®-M7 (Action Clock: 480MHz)
8 Sensors
- Acceleration/Gyro Sensor (3)
- Terrestrial Magnetic Sensor (2)
- Air Pressure Sensor (3)
Specification
Specification
Processor
32-bit Arm® Cortex®-M7
480MHz, 1MB RAM, 2MB Flash
Sensor
Accel/Gyro: ICM-20689
Accel/Gyro: BMI088 / ISM330DLC
Magnetometer: BMM150
Barometer: DPS368 / BMP388
Interface
3 xdedicated PWM/Capture inputs on FMU
Dedicated R/C input for CPPM
Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
Dedicated S.Bus servo output
5 x general purpose serial ports
3 x I2C ports
4 x SPI buses
Up to 2 x CANBuses for dual CAN with serial ESC
Analog inputs for voltage / current of 2 batteries
Power
All peripheral outputs over current protected, all inputs ESD protected
Size
50mm(W) x 90mm(H) x 20mm(D)
Key Features
main function
- ARM CORTEX-M7
- 480 MHz 1,024 KB RAM
- Up to 3 TELEMETRY
- Compatible with Ardupilot /Autopilot
- FMUV6 Firmware for DRONEiT Only
DRONEiT-FC
Flight Controller (FC)
DRONEiT-FC is a high-performance FC to secure the stability of data processing and flight for mission.
Key Benefits
PRODUCT DESCRIPTIONS
Single-board Flight Controller
STM32H7 Series 32-bit Arm® Cortex®-M7 (Action Clock: 480MHz)
8 Sensors
- Acceleration/Gyro Sensor (3)
- Terrestrial Magnetic Sensor (2)
- Air Pressure Sensor (3)
Specification
Specification
Processor
32-bit Arm® Cortex®-M7 480MHz, 1MB RAM, 2MB Flash
Sensor
Accel/Gyro: ICM-20689
Accel/Gyro: BMI088 / ISM330DLC
Magnetometer: BMM150
Barometer: DPS368 / BMP388
Interface
3 xdedicated PWM/Capture inputs on FMU
Dedicated R/C input for CPPM
Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
Dedicated S.Bus servo output
5 x general purpose serial ports
3 x I2C ports
4 x SPI buses
Up to 2 x CANBuses for dual CAN with serial ESC
Analog inputs for voltage / current of 2 batteries
Power
All peripheral outputs over current protected, all inputs ESD protected
Size
50mm(W) x 90mm(H) x 20mm(D)
Key Features
main function
- ARM CORTEX-M7
- 480 MHz 1,024 KB RAM
- Up to 3 TELEMETRY
- Compatible with Ardupilot /Autopilot
- FMUV6 Firmware for DRONEiT Only